The size of the T-groove varies depending on the size of the machine tool and the manufacturer. The set flat pliers standard comes with a guide block. If the guide block cannot be used for non-standard slot width (A size), it can be used as a special accessory to provide a guide block that matches the size of the machine tool. The installation bolts and fixtures are not standard attachments.
Depending on the installation location, there may be conflicts with the machine tool's columns and splash shields. Please confirm the full length of the flat jaw pliers and the distance from the installation position (guide block) to the above-mentioned machine tool components, as well as the action of the movable clamp body of the flat jaw pliers.
If the workpiece (processing part) is not within the processing range (movement range of the spindle), it will not be possible to process. Especially with parallel configuration of flat pliers (for multiple use), the installation space varies depending on the shape and installation method of the flat pliers.
The above content is sourced from the internet. If there is any infringement, please delete it.
